Designed for producers who want to automate their control valves without overcomplicating their processes, Kimray's new Electric Actuator is easy to install, provides precise control, and emits zero emissions.
(405) 525-6601
Mon - Fri, 8 AM - 5 PM CST
Durable, Emissions-Free Control
Zero-emission, automated control is quickly becoming a necessity for energy producers.
The new Kimray Electric Actuator is designed for producers who want to automate their control valves without overcomplicating their processes.
A Simple Solution for Control Valve Actuation
For energy producers looking for an easy-to-use product that results in big efficiency gains, the Kimray Electric Actuator provides zero-emission electric operation with remote monitoring and control.
The actuator features an on-board OLED screen, providing operators with push-button set up and calibration. And with its real-time two-way communication capabilities, the actuator allows producers to minimize travel time, increase ability to pump by exception, and greatly improve their process monitoring.
Paired with a Kimray valve body, the Electric Actuator can be used anywhere your control valves are, including in liquid dump, gas regulation, and artificial lift applications.
The Electric Actuator has been certified for use in both North and South America, with additional regions and certifications pending.
Electric Actuator Options
What Engineers Like About the Electric Actuator
Precise Control
Engineers like that the Electric Actuator has an actuation speed of up to 1/2" per second, allowing for precise flow control.
Real-Time Two-Way Communication
With Modbus RTU over RS485, communication happens within seconds of a process change. This allows producers to monitor and control field processes remotely.
Zero Emissions
Operates via electric power with line voltage or solar panel. This solution addresses a challenge producers face today with increased emission regulations where non-vent solutions are required.
What Operators Like about the Electric Actuator
Straightforward Installation
While some electric controllers can be intimidating, the Electric Actuator is designed for simple, straightforward installation and calibration. With its on-board OLED screen, calibration is a matter of pushing the buttons on the actuator itself—no laptop required.
Works with Kimray Control Valves
The Electric Actuator is compatible with standard Kimray valves, like the 1-10" Stem-Guided High Pressure Control Valve and the Low Pressure High Volume Valve, which most operators are familiar with.
Battery Backup for Fail Position
In the event of a power failure, the battery backup will drive the valve to its fail position, ensuring safe operation.
Electric Actuator in the Field
Zero-Emission Control in the Bakken
See how the actuator performed on a gas-assisted plunger lift application in Wyoming.
Precise Control in South Texas
See how the actuator performed on a plunger lift application in the South Texas heat.
Performed extremely well in our application
This actuator has performed extremely well in our application. With its user-friendly set up, it has also helped us standardize on a specific SOP for installation of the automated control valve.
Find Kimray In Your Area
To see how the Electric Actuator might fit into your operations, talk to a specialist at our corporate office by calling (405) 525-4298, Mon - Fri, 8 AM - 5 PM CST.
We ship all products from our 10 Kimray Stores and have authorized Kimray distributors across the United States and around the world. Our distributors and stores are divided by region, with dedicated representatives specializing in their areas.
Our International Sales has information on certifications and non-domestic purchasing.